- Product information
- Advantages
NIBE F1155 is an intelligent, inverter-controlled ground source heat pump without integrated hot water tank, which makes it easy to install in locations with low ceilings. A separate hot water tank is selected according to hot water requirements. NIBE F1155 provides optimum savings since the heat pump automatically adapts to your home’s heating demand. NIBE is a leading player in the field of inverter technology, with many years’ experience of output-regulating ground source heat pumps and one of the widest product ranges on the market. NIBE F1155 has a high seasonal performance factor, resulting in minimal operating costs. The heat pump is available in three different output sizes: 1.5-6 kW, 3-12 kW and 4-16 kW, and is suitable for both small and large properties. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
Optimum customisation
Leading inverter technology and separate hot water tank for optimum customisation.
Top performance
Three output sizes for optimal seasonal performance factor and minimal operating costs.
Maximum comfort
Energy-saving smart technology with user-friendly control for maximum comfort.
- Accessories
- Technical data
- Document
NIBE HPAC 40
Climate exchange module. Elegant and timeless design,High flexibility for the best indoor climate, Passive cooling, Active cooling in combination with the heating of hot water, Installer-friendly, Settings shown on the heat-pump’s display.
NIBE EME 10
To optimise the use of solar generated electricity.
NIBE SOLAR 42
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
NIBE FLM
The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
NIBE ACS 45
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
NIBE PCS 44
Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.
NIBE TOC 30 Top cabinet 245 mm
Top cabinet
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 18 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
NIBE TOC 30 Top cabinet 345 mm
Top cabinet
NIBE MODBUS 40
A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.
NIBE TOC 30 Top Cabinet 385-635 mm
Top cabinet
NIBE EF 45
Extension frame.
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
NIBE EME 20
Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.
NIBE RMU 40
With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.
NIBE ERS 30-400
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
NIBE BAU 40
Wall console BAU 40 for wall mounting.
NIBE OPT 10
NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15
NIBE PCM 40
Passive cooling module. Elegant and timeless design High flexibility for best indoor climate Passive cooling and hot water production simultaneously Installer-friendly Settings shown on the heat pump’s display Compatible with heat pumps in the NIBE F1145/F1245 and F1155/F1255 series. FEATURES OF NIBE PCM 40/PCM 42 The NIBE PCM accessory gives your installation a high degree of flexibility. It is compatible with the NIBE F1145/F1245 and F1155/F1255 series, which was developed in such a way as to enable all the heat pump’s potential applications - both free cooling and hot water production. Combine your heat pump with NIBE PCM for passive / free cooling. It works, even while your system is continually heating hot water. NIBE PCM is easily controlled via the heat pump’s control panel, where both settings and monitoring are easily handled at the push of a button. This accessory’s timeless design means that it blends in well with your other heat pump equipment.
NIBE PVT
NIBE PVT 40 makes it possible for your heat pump to use NIBE PVT panels as a heat source. The heat pump regulates the temperature of incoming brine in the summer, and closes the shunt valve in the winter when the temperature reaches the set value. The NIBE PV-T collector is an alternative, innovative, heat source for use with NIBE ground source heat pumps, removing the requirement of a ground or bore hole collector array . The PV-T collectors produce electrical energy that can be used to operate a ground source heat pump.
NIBE RTS 40
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
NIBE SOLAR 40
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Height (mm)
1500
Width (mm)
600
Depth (mm)
620
Net weight (kg)
150
Product efficiency class room heating, 35 °C
A+++
Product efficiency class room heating, 55 °C
A+++
System efficiency class room heating, 55 °C
A+++
System efficiency class room heating, 35 °C
A+++
Efficiency class water heating
A
Refrigerant amount, CO2 equivalent (ton)
2,06
Refrigerant amount, R407C (kg)
1,2
Declared tap profile
XL